Home  /  Products  /  Salt Spray
ENV-07

Salt Spray (Fog) Test Chamber

Continuous, intermittent or cyclic salt fog testing per ASTM B117, ISO 9227, IS 9000 and JIS Z2371. Standard NSS, AASS and CASS test profiles.

5% NaCl @ 35 degC ASTM B117 / ISO 9227 NSS / AASS / CASS
Salt Spray

Purpose & Application

The ENV-07 salt spray chamber generates fine atomised saline fog for accelerated corrosion testing of coatings, fasteners and assemblies. Standard 5% NaCl at 35 degC fog matches ASTM B117 NSS conditions; CASS and AASS profiles are supported via temperature and pH control. Complies with ASTM B117, ISO 9227, IS 9000 Part 11, JIS Z2371 and DIN 50021.

Available Sizes

ModelWorkspace (H x W x D)Specimen LoadFixture
ENV-07-250L60 x 60 x 70 cm20 KgInclined panels
ENV-07-450L75 x 75 x 80 cm30 KgInclined panels
ENV-07-1000L100 x 100 x 100 cm60 KgInclined panels
ENV-07-CBCustom BuiltSpecifySpecify

FRP / PP construction resistant to chloride corrosion. Specimen panels held at 15-30 deg from vertical.

Key Specifications

Solution
5% NaCl (or per spec) - automatic mixing
Test Temperature
35 degC NSS / 50 degC AASS / 50 degC CASS
Fog Collection
1 to 2 ml / hour / 80 cm-sq
pH Control
6.5 to 7.2 (acid feedstock for AASS / CASS)
Programmer
Microprocessor with cycle timer
Atomisation
Compressed air nozzle with bubbler tower
Construction
FRP shell, PP / glass interior
Standards
ASTM B117, ISO 9227, IS 9000 P11, JIS Z2371

Built-in Capabilities

  • Continuous, intermittent and cyclic fog modes
  • Automatic solution mixing and brine top-up
  • Bubbler tower for saturated air supply
  • pH-controlled feedstock for AASS / CASS
  • Acrylic transparent canopy
  • Inclined specimen rack with PP rods
  • Wash-down sequence with deionised water
  • Optional NABL calibration

Protection & Reliability

  • Low solution level cutoff
  • Low compressed-air pressure cutoff
  • Over-temperature protection on heater
  • Door interlock with hood
  • Over-current relays and MCBs
  • Audio-visual alarm for critical functions

Configure Your Chamber

Tell us your testing requirements and we'll design a chamber tailored to your specifications. Our engineers respond within 24 hours.

1. Model Code & Variant
2. Specifications
3. Configuration & Add-ons
4. Your Details

By submitting, you'll receive a tailored quotation from our engineering team within 24 hours. We respect your privacy and never share your information.